How to Find Studs in a Plaster Wall

Posted on

How to Find Studs in a Plaster Wall – If you intend to hang something on your walls — if you have drywall or plaster — most directions will tell you to hang the item on a stud. Studs are vertical wooden beams that are part of the wall frame. Plasterboard or plasterboard is placed on the studs. Although you can easily use a stud finder to find studs in drywall, you can not use most stud detectors with plaster. Instead, you need to rely on a much more primitive — but equally accurate — form of finding amounts.

Measuring Distance cannot be much help when looking for studs in a plaster wall. Plaster walls are usually found in old houses, and the builders do not use the same spacing standards when plastering was common. You don’t want to also dig the plaster by ramming nails into the plaster because is a fragile material that fleas, and it is not as easy to repair a drywall. You may have success with the hit test, but the most reliable way to find studs in a plaster wall is to use a high-sensitivity stud detector capable of distinguishing the studs from the surrounding lathe. A stud detector capable of detecting metal can also help in identifying where this is nailed to the studs.

How to Find Studs in a Plaster Wall


How to Find Studs in a Plaster Wall


  1. Hit the wall — from the far left of the wall — moving slightly to the right. When you hit, he should feel and sound hollow on the other side. This is the area between the posts.
  2. Move slowly to your right while gently hitting the wall. When the wall feels stronger and you hear a thud while striking, you have found a stud. Place a mark on the wall with a pencil to indicate where a stud was found.
  3. Continue moving to the right and knock on the wall until you meet the next hard wall area. Place a mark on this pad as well. Do this until you have scored all the studs.
  4. Measure the length of each pad. As a rule, the amounts are 16 inches.
  5. Press a nail into the wall where you placed a stud mark. If there is some resistance, you have aligned the nail perfectly with the stud.


Tips and Warnings

How to Find Studs in a Plaster Wall – Keep in mind that most electrical outlets are mounted on the stud. If there is an exit on the wall, start at this point (using the hit method) moving to the right, then to the left, away from the power line.


Another Solution

  1. The easiest way to locate a stud is to press the wall with your fingers or a small hammer. The fact taps a hollow sound between the poles, and this sound deepens gradually as you approach the one. When you press directly on a stud, you will hear an easily recognizable, thumping sound. This method is approximate only because it does not allow you to distinguish between the center and the edges of the stud. If you need to locate the center, push a finishing nail into three or four strategic points within a distance of 1 1/2 inch, which is the thickness of a stud. You can easily patch these small holes with the recapping compound.
  2. You can buy an amount detector at a hardware or building power outlet, and if you need to find studs often, it can be a useful tool to have. It is an electronic device that detects the difference in density between the empty space and the space occupied by an amount. It can find metal poles as easily as wooden ones, but a heavy magnet will allow you to easily find metal poles as well. To use a stud detector, simply place flat on the wall and move it horizontally until the meter shows a stud or light, depending on the type you have. Some stud detectors are able to distinguish the center of an amount from the edges, while others-usually those with a light-are less sensitive.


How to Find Studs in a Plaster Wall

(Visited 27 times, 27 visits today)